Here are some notes and ideas on how to start a community network.

Research

It is important to do some research first. There are a few really big community networks (mostly non-English speaking). The biggest is Guifi in Spain. Others include Freifunk in Germany, and Wlan Slovenija. Follow those links and see what they are doing.

Guifi began on farms and gradually expanded across the country. They use hundreds of kilometers of fiber, and wireless in all modes- point-to-point (P2P), point-to-multipoint (P2MP) and mesh (MP2MP). Here is a good long interview with Ramon Roca, who started Guifi.

NYC Mesh has done many presentations that explain what we are doing. You can watch videos and see the slides here.

Essential Reading

Wireless Networking in the Developing World (WNDW) is a great free book about designing, implementing, and maintaining low-cost wireless networks. http://wndw.net/book.html.

You need to know the basics of wifi and networking. The OSI layers, IPv4, IPv6, 2.4GHz vs 5GHz, wifi modes- infrastructure vs. ad-hoc (which is used by mesh routers) etc. This book covers all of that.

Community organizations with shared resources often fail. This is called the tragedy of the commons. Others succeed and have been successful for centuries. Governing the Commons, Ostrum lists the principles that the successful collectives share. Design principles illustrated by long-enduring “common pool resources” (CPR) institutions-

Choose appropriate antennas, routers and firmware

NYC Mesh is a hybrid network of point-to-point, point-to-multipoint (sector antennas), ethernet and mesh. It is important to pick the right solution for each networking problem.

Mesh usually uses different firmware from the factory firmware, and is good for the last mile as it re-configures automatically. If there is a mesh network on your block, often you can just velcro a NanoStation to your window and you are connected.

Point-to-multipoint sector antennas are good for getting high-bandwidth into neighborhoods. Put one or more of these on a tall building. You don’t need to flash these with mesh software, just use the factory software such as AirMax, usually set in “bridge” mode.

Point-to-point is used to go long distances often with expensive equipment such as an AirFiber pair.

For mesh protocols use a BATMAN protocol such as bmx6 or batman-adv (bmx7 is still experimental). There are prebuilt packages- Libremesh, qMp and Gluon. We use qMp. Don’t try creating your own, just modify an existing package to your configuration. Libremesh has been very active lately and has support for a large range of routers. We are currently trying this as well.

Install your first node

Some groups never get around to installing anything. Just go and install your first node to prove you can. Set up a public access point in a cafe or other meeting place. Leave the router open, and set the SSID to “-Our Name-“ (the first dash means it will be at the top of the list of SSIDs). With each successful install you get experience, publicity and more members joining.

Online collaboration

Commons license

The commons license is important as it is has the rules to help the network sustain and expand. The basic idea is that anyone can join the network but they also must agree to not harm the network and also to extend the network by letting other people join their node. It has a similar function to the GNU GPL license for open source software, where you are free to use the software but must share the changes you make to the code.

The basic tenets are:

As the network grows, people may want to build businesses around the network. This is generally a good thing as the businesses will need the network to be stable and will help in doing this. The license will prevent any business from closing up the network and unduly profiting from it.

Meetup spaces

Get a regular space for meetups. There are offices that will donate their space for free after work hours. These are good for general meetups. You should also have technical meetups in makerspaces where you can configure routers and practice crimping ethernet cable etc.

Install team

Get a team of people together to do installs. These installs will mostly be weekends as that is when people are free during the day. The team has to know how to crimp and run cable, configure and align antennas, drill and install antenna mounts and drill through window frames.

Roof installs can sometimes be done using abandoned TV antenna masts. Otherwise you will need to install your own J-pipe mast or bracket using a drill, or use a non-penetrating mast

Whole buildings

Try to get whole buildings to install a rooftop antenna and then run ethernet to the apartments. You want long term installs! Don’t connect rooftops unless a) multiple tenants OR b) person owns apartment OR c) person intends to stay very long time i.e. avoid students etc. who will move out!

Gateways

Plan your internet gateways. Initially you will probably use your home ISP connection (totally legal in this country). Eventually you may want a “supernode” with bigger bandwidth. An IXP or ISP may donate a connection, as DE-CIX and Packet.net did for us.

Another kind of gateway is a public wifi access point. By using directional routers you can extend the range of public access points very easily. Here are some instructions- how to connect to a kiosk.. This uses a NanoStation.

Tall structures

Tall structures are the fastest way to expand the wireless mesh. There are a few different types in a city and you need to try them all- housing association buildings, skyscrapers, churches, schools, libraries, existing antenna masts and building coops. Make specific presentations and handouts for different types of structures.

Supernodes

Plan your first major gigabit install at an IXP or tower. This will have sector antennas (P2MP) and point to point. You may need a network engineer to help in their spare time. An IXP connection requires a network engineer familiar with BGP.

A sector antenna is basically a Wireless ISP (WISP) tower so WISP expertise is needed. The best online forum is the Ubiquiti community, and the best organization in America is WISPA. The sector antennas can be a gateway and also bridge your mesh network and reduce the amount of hops. Try to not to be more than three hops from a gateway. Every hop halves the bandwidth and adds ~15ms of latency.

To get a long distance from a gateway use P2P setups- either cheap: 150Mbps such as a pair of LiteBeams, or expensive: gigabit such as a pair of AirFiber.

The most popular cheap outdoor routers are Ubiquiti. Other good companies are LigoWave, MikroTik.

Local mesh networks

Besides connecting to a major tower like a supernode, you can build up a neighborhood network. This is usually based around a person who has strong connections to that area, and can be as simple as sharing your connection within a building using ethernet and mesh routers. Also putting a mesh router in your window to give access to a cafe or park across the street or a neighboring building.

Computer networking groups

Go to local NANOG and other computer networking groups. These people will understand what you are trying to do, and be very supportive. Some of them may want to join the group and help with the hardcore networking problems.

Talk to local WISPs and alternate ISPs. WISPs have the skills needed to make a fast wifi network.

Fiscal sponsor

Get a non-profit to be your fiscal sponsor (ISOC in your state etc.). This will make it easier to accept donations and get grants. Eventually you may want to form a non-profit organization.

Grants

Apply for grants! ISOC has a “Beyond the Net” grant which is specifically for community internet projects. Other grants and city RFPs will come up. It’s a lot of work but you should apply to everything you can.

Donations

Set up an easy to use donation page on your website. You will need to figure out a structure that can accept tax-deductible donations, like a 501(c)3 fiscal sponsor, or form a non-profit organization. You can use a service like Stripe to do credit-card processing.

Collaborations

Look for potential collaborations. Many computer networking companies are strictly business to business and will not see you as a competitor. They are often willing to donate to a community network. People that work at these companies will want to join the network and set up their own nodes.